Table of Contents
Advertisement
Actiontec Wireless-Ready DSL Gateway User Manual
LAN IP Address
Selecting
Address in the "Advanced Configuration" screen generates the
LAN IP
"
Address" screen. The value in the
LAN IP
address of the Gateway as seen on the network.
The
address of the Gateway can be modified, but Actiontec recommends
LAN IP
keeping the default factory setting (192.168.0.1).
Note: If the Gateway's
Server range is within the same subnet. For more infor-
DHCP
mation, see "
DHCP Server
Selecting
Server in the "Advanced Configuration" screen generates the
DHCP
"
Server" screen. The Gateway has a built-in
DHCP
Configuration Protocol) server that automatically assigns a different
each computer on the network, eliminating
The factory default setting is On. To disable the
Address is modified, verify the
LAN IP
Server Configuration."
DHCP
44
Address text box is the IP
LAN IP
(Dynamic Host
DHCP
address conflicts.
IP
Server, select Off.
DHCP
address to
IP
Advertisement
Table of Contents
Need help?
Do you have a question about the Wireless–Ready DSL Gateway and is the answer not in the manual?
Questions and answers