Wireless - ActionTec GT724-WG User Manual

?
Note: If the first computer connected to the Gateway is connected via
computers can be connected in this manner. Connect additional computers via Ethernet
(see page 71).
1. Insert the Installation
automatically. Wait until the following screen appears, read the on-screen instructions, then click Next.
2. Read the instructions, select Additional Computers by clicking on the appropriate check box, then click
Next.
77 Chapter 7 Setting Up a Network
3. Select USB, then click Next.
4. When the next window appears, get the blue USB cable from the Quick Start Kit, then click Next.
78 Actiontec 54 Mbps Wireless DSL Gateway User Manual
5. Plug one end of the blue USB cable into the blue USB port on the back of the Gateway, then click Next.
6. Plug the other end of the blue USB cable into a USB port on the front or back of the computer, then
click Next.
79 Chapter 7 Setting Up a Network
7. Make sure the USB light glows steadily green, then click Next.
8. A series of congratulations windows appears. Click through them to exit the Installation Buddy.
80 Actiontec 54 Mbps Wireless DSL Gateway User Manual
The computer is connected to the Gateway via USB.

Wireless

To create a wireless network with the Gateway, see "Wireless Settings" on page 54 of this manual. After
setting up a wireless network, consult the manual of the wireless adapter connected to the computer to
connect to the Gateway's wireless network. Computers wirelessly connected to the Gateway must have
wireless capabilities (via a
in the drive of the computer. The Installation Buddy starts
CD CD-ROM
wireless adapter,
PCI USB
USB
wireless adapter, built-in wireless adapter, etc.).
, no other
28