Table of Contents
Advertisement
Problems You Can Solve
Displayed Messages and Explanations
The signal is too weak to make a call. Try
again when the signal strength is one bar or
stronger.
The system is busy with other calls. Wait a
while and try your call again.
You called a number for which you have set
call restrictions. See the
changing call restrictions.
You entered an incorrect security code. Enter
the correct security code.
The battery power is low. When the terminal
shuts itself off, replace the battery with a fully
charged one, or use an alternate power
source, such as a travel charger.
Your text message memory is full. Erase some
stored messages so you can receive more mes-
sages.
Your terminal is searching for a wireless sys-
tem.
50
Problems and Possible Solutions
The terminal does
not turn On.
Menu for
GP8FT
The terminal is not
ringing when a call is
received.
The terminal
becomes warm dur-
ing long calls.
Your terminal is searching for a wireless sys-
tem.
.
Recharge or replace the battery.
If you are using a battery eliminator, make sure
that the battery eliminator is fully inserted into
the vehicle cigarette lighter. Make sure the vehicle
is supplying power to the cigarette lighter.
Check the Sounds Menu to make sure the termi-
nal is not set for Silent Mode.
This is not a problem. The terminal may feel
slightly warm during extended calls.
Problems You Can Solve
Advertisement
Table of Contents
