Care Of Your Atlas Dca Pro - Peak Electronics DCA75 User Manual

Advanced semiconductor component analyser with graphics display and pc connectivity
Table of Contents

Advertisement

Atlas DCA Pro User Guide

Care of your Atlas DCA Pro

Your DCA Pro should provide many years of service if used in
accordance with this user guide. Care should be taken not to expose
your unit to excessive heat, shock or moisture. Additionally, the
battery should be replaced at least every 12 months to reduce the
risk of leak damage.
Please replace
the battery.
The battery can be replaced by carefully opening the DCA Pro by removing
the three screws from the rear of the unit. Take care not to damage the
electronics.
We recommend that the battery is replaced with a high quality battery
equivalent to an Alkaline AAA, LR03 or MN2400 (1.5V). Replacement
Alkaline AAA batteries are available from many retail outlets.
Avoid touching
DO NOT OVER-TIGHTEN THE SCREWS
If a low battery warning message
appears, immediate replacement of the
battery is required.
this area
Page 38
April 2015 – Rev 1.4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Atlas dca pro

Table of Contents