Windows Xp Installation - Peak Electronics DCA75 User Manual

Atlas DCA Pro User Guide

Windows XP Installation

1. Make sure you have the latest Windows Updates and Service Pack 3.
2. Run "Setup.exe" on the supplied USB flash drive. Alternatively, you can
download and run the digitally signed installation file from our website:
www.peakelec.co.uk/downloads/dcaprosetup.exe
3. During the setup process, you may be asked to install .NET Framework 4.
The installation files for that are included on the USB flash drive and don't
need to be downloaded. If you are running the installation from a
downloaded copy of our software then you may be prompted to download
the .NET package. You need to accept the Microsoft agreement and the
process will complete in a few minutes (sometimes up to 10 minutes).
4. When the DCA Pro software installation
is complete, you can plug in your
DCA Pro to a convenient USB socket.
It's best to choose a socket directly on
your computer rather than a hub. After a
few seconds, you should be presented
with the
Wizard". Make sure you select "Install
from a list or specific location" and then click Next.
5. You will then be presented with this
window. Make sure the box "Include
this location in the search" is checked.
It should already be filled with the
location for the Peak Driver. Then click
Next.
6. Your DCA Pro should chime when
your software is ready to use.
"Found New Hardware
Page 30
April 2015 – Rev 1.4