Audible Settings - Peak Electronics DCA75 User Manual

Atlas DCA Pro User Guide

Audible Settings

Your DCA Pro has a built-in sounder for alerting you to various
test results and conditions. Additionally, the sounder produces
short tones to reinforce the tactile feedback when pressing
buttons.
Here is a summary of the various tone types:
Condition
Power-up.
Power-down, including auto-off.
Button press.
Component detected.
Faulty, unknown or no part detected.
If you wish, you can switch the audible alerts on or off.
To change the current setting for audible alerts, while the unit is already on,
simply press and hold the on-test button for a few seconds.
The new sound setting will then be confirmed on the screen.
Sound is Off
To change back again, simply press and hold the on-test button again for a
few seconds.
Tone Type
Rising 3 notes.
Falling 3 notes.
Very short "blip".
Short Low-High.
Long High-Low.
Sound is On
Page 37
April 2015 – Rev 1.4