Pc Mode - Special Functions; Firmware Upgrade - Peak Electronics DCA75 User Manual

Atlas DCA Pro User Guide
Special Functions

Firmware Upgrade

From the program's "Help" menu, select "Check for Updates".
If you are connected to the internet, the program will check for new PC
Software (that includes the latest firmware). If newer software is available, you
will be guided to the download location.
The programming operation should take no more than a minute or so. Don't
interrupt the process and wait for the confirmation that the programming
operation has been successfully completed.
Don't worry if the firmware upgrade process doesn't succeed first
time. Windows sometimes takes time to prepare the built-in HID
driver that is used during the firmware upgrade process. If the
firmware upgrade process fails, don't panic, just try again, it should be
fine once Windows gets its built-in driver initialised.
LCD Contrast
The PC software allows you to adjust the instrument's LCD contrast.
From the program's "DCA Pro" menu, select "LCD Contrast".
You will then be presented with a simple slider to make your contrast
adjustments. When you're finished, you can click on the cross of the slider
window. Your new contrast value is automatically saved within the DCA Pro.
Page 36
April 2015 – Rev 1.4