Table of Contents
Advertisement
Using the Batteries (Continued)
Charging with TTA-certified standard 24-pin charger
Open the cover of the external connector port, and
connect the charger adapter.
Connect the TTA-certified standard 24-pin charger to the
charger adapter.
Connect the power plug of the TTA-certified standard 24
charger to the receptacle.
• Red: charging, Green: Charging complete.
28
28
Battery charging status
Charging with TTA-approved standard 24-pin charger
Type
Charging
Charging complete
Lamp color
Red
Green
• When lamp blinks in red.
- The charging terminal is not in good contact.
Check if the battery is clean and check the connection sta
tus of the charger before trying to charge the battery again.
- Battery or the other accessories may be damaged.
Contact the service center.
• When lamp is orange.
Battery is being charged in a place too hot or too cold.
When the temperature returns to normal, the lamp turns red
and begins charging again.
- If it is too hot or too cold, the phone automatically stops charging,
and the perimeter of the icon becomes red (
).
If the tempera ture returns to a room temperature, battery will start
charging again.
Battery charging time
Type
Slim battery
Standard battery
Time
Approx. 145 minutes Approx. 165 minutes
•
Charging time can be different depending on the status of the
battery or charger.
•
Charging time may increase if the rated voltage of the charger
is low.
•
If you use the phone while charging, there is a risk of electric shock
and charging time may increase.
•
When you charge the battery completely discharged, the mobile
phone is not turned on until it is charged with available battery
voltage.
Battery operating time
Standard
Voice call
Video call
Terrestrial DMB
Type
waiting time
time
time
watching time
Slim
Approx. 175
Approx. 200
Approx. 110
Approx. 190
battery
hours
minutes
minutes
minutes
Standard
Approx. 210
Approx. 240
Approx. 120
Approx. 230
battery
hours
minutes
minutes
minutes
※ Based on a new battery/Bluetooth mode off
•
Above service time of the battery is measured according to
standard set by SKT.
•
The Bluetooth function requires more battery power.
•
More power is used during a call or while NATE, ⓜPlayon, MP3, TV
(TDMB) is being used. The longer the call time, the shorter standby
time gets.
•
Receiving a call will consume as much battery as making a call.
•
Standby time may get shorter in out-of-service area.
•
Operating time may vary depending on the charge status,
tempera ture (high/low), wave status in the surrounding and the
lighting.
Low battery
•
If a battery is low the low voltage alarm is on and (
) icon
will flicker
•
When the battery is low, functions may not be able to operate.
Charge the phone immediately.
29
29
Advertisement
Table of Contents
