Table of Contents
Advertisement
Voice call (Continued)
Receiving a voice call
If you receive a call, open the folder ▶ or press
• If you press and hold the wheel button, the ring or vibration
switches into mute.
• To activate the silent operation set on Call Settings, just turn
your phone over. Then, ring or mute switches into mute.
('Silent operation', refer to page 130)
• If you want to reject an incoming call, press
.
• If you have subscribed to 'Calling Line Identification
Presentation' service, the number of the caller is displayed on
the screen.
50
Note
• You can download background image for incoming calls from
.
NATE, and change it in 'Background' of the 'Display' menu.
• Depending on the size of the downloaded image, it may take time
to display the background on the screen.
Receiving a call with a stereo earphone
If a call is incoming, press the button on the stereo
earphone.
• If the call is finished, press
or press the button on the
stereo earphone.
• If a call is incoming as the stereo earphone is connected, the
stereo earphone rings even if the phone is set to vibrate.
The call is continued even if you close the folder during a call.
Answer Options
Press
(Left) ▶
▶
▶
on the
standby screen
• You can select the call answering option.
Open phone
Open the folder to receive a call.
Anykey
Press any key except
to receive a call.
Send key
You must press
to receive a call.
The call is answered automatically in 3 sec
After 3 seconds
from the ring.
Using speaker phone
Press
during a call.
•
is displayed when you use the speaker phone. To cancel
the function, press
again.
• When you use the speaker phone, the microphone must face
the user at a distance not farther than 30cm.
• This function is released automatically after the call is finished
Adjusting volume
Turn the wheel button during a call.
• You can adjust the volume of the receiving voice.
51
Advertisement
Table of Contents
