Table of Contents
Advertisement
Product Operation
After the batteries are installed and you have programmed the
remote for the codes that operate your products, you can use your
remote to operate a TV, VCR, Cable Box, CD Player, or Satellite
System, etc.
TV (Press TV First)
VCR
(Press VCR First)
Satellite System
(Press SAT first)
To Operate:
1. Press the TV, VCR, CBL, SAT, etc.
button (depending on which product
you want to operate).
2. Aim the remote at the product.
3. Press POWER to turn on the product.
4. Press other buttons to operate the
features of your product.
DVD Player
(Press DVD first)
CD Player
(Press CD first)
22
Wireless Receiver
The remote transmits wireless radio Frequency (RF) commands.
The wireless receiver (included) receives these commands and
converts them to regular Infrared (IR) commands. These IR
commands are then emitted from the IR Extender (also included) to
control your A/V components. This lets you control your A/V
components from ANY room in your home - you don't need to aim
the remote at your component!
Connect the IR Extender
cord (included) to this
socket and attach the IR
emitters to the front of the
components you want to
control.
Troubleshooting
Remote does not operate your product.
•
Press the mode button of the product you want to control.
•
Program the remote with a new code.
•
Install new batteries. (You might have to reprogram your
remote after installing new batteries.)
•
Remote may not be compatible with your product.
Remote does not operate some features of your product.
•
Program remote with a new code.
•
Remote may not be able to operate all features of your product
or button names might be different than your product.
Indicator light blinks after you program a product code.
•
Remote did not accept the code.
•
Try to program the code again or try a different code.
Connect the plug-in power
supply (included) to this jack
and plug the power supply
into any 120V AC outlet.
Antenna
IR emitters
23
Advertisement
Table of Contents
