STEP 4: RESISTANCE ADJUSTMENT The resistance of the TANK is pre-set at the factory. However if the resistance needs to be increased or decreased please follow the steps outlined in STEPS 4, 5, 6, 7, 10, 11 & 12. REMOVE TIRE...
Page 9
STEP 7: RESISTANCE ADJUSTMENT 1. LOOSEN FOUR BOLTS 3. RETIGHTEN FOUR BOLTS 1/16" 1/16" BRACKET 2. MOVE BRACKET 1/16" TO THE LEFT FOR MORE RESISTANCE. MOVE BRACKET 1/16" TO THE RIGHT FOR LESS RESISTANCE. PAGE 9...
STEP 8: CHAIN ADJUSTMENT The chain tension is pre-set at the factory. However if the chain becomes too loose or is too tight, please follow the steps outlined in STEPS 4, 5, 6, 8, 10, 11 & 12. 1. LOOSEN FOUR BOLTS CHAIN 2.
STEP 9: BELT ADJUSTMENT The belt tension on the TANK is pre-set at the factory. However if the belt needs to be re-tensioned, please follow the steps outlined in STEPS 4, 5, 6, 9, 10, 11 & 12. TO TENSION BELT, LOOSEN...
Page 15
Most bicycle shops carry a variety of different BELT lubricants and can recommend a lubricant based on the conditions where the TANK will be used. HANDLE BOLTS WHEEL BOLTS SPROCKET SPROCKET...
Need help?
Do you have a question about the TANK and is the answer not in the manual?
Questions and answers