Auxiliary Device Operation; Using An Aux Source; Adjusting The Video Screen (Default: Center) - Hyundai Veloster Owner's Manual

Auxiliary device operation

Using an AUX source

It is possible to use auxiliary equipment
with unit.
1. Press "MEDIA" until "AUX" screen
appears.
AUX Audio
AUX Video
2. Connect an auxiliary device to the
AUX connector, then activate the
auxiliary function.
Note
• Some auxiliary devices that do not have
the video source may not produce output
to the video screen.
• In case of some iPod devices, Use the
iPod cable for exclusive use of iPod for
video playback when connecting iPod
to the AUX connector.
• Video is not available while driving.
(Based on the traffic regulation, Aux
Video is only available whenever vehicle
is in stop condition with parking brake.)
60
Adjusting the video screen
(Default: Center)
For safety reasons, the video screen
cannot be viewed while your vehicle is in
motion. To view video screen, you must
stop in a safe place and put on the
handbrake.
1. Touch the screen on the aux video
mode.
2. Touch "Option" on the screen.
3. Select the item you want to adjust.
- Brightness: touch or
the brightness of screen.
- Contrast: touch or
the contrast of screen.
- Saturation: touch or
the saturation of screen.
Note
Touch [Center] to return to the default
settings.
to adjust
to adjust
to adjust