Auxiliary Device Operation; Using An Aux Source; Adjusting The Video Screen(Default : Center) - Hyundai ELANTRA Owner's Manual

Auxiliary device operation

Using an AUX source

It is possible to use auxiliary equipment
with unit
1 Press "MEDIA" until "AUX" screen
appears
AUX Audio
AUX Video
2 Connect an auxiliary device to the
AUX connector, then activate the
auxiliary function
 Note
• Some auxiliary devices that do not have
the video source may not produce output
to the video screen
• In case of some iPod devices, Use the
iPod cable for exclusive use of iPod for
video playback when connecting iPod
to the AUX connector
• Video is not available while driving.
39 39
Adjusting the video screen
(Default: Center)
For safety reasons, the video screen
cannot be viewed while your vehicle is in
motion To view video screen, you must
stop in a safe place and put on the
handbrake
1 Touch the screen on the aux video
mode
2 Touch "Option" on the screen
3 Select the item you want to adjust
- Brightness: touch or
the brightness of screen
- Contrast: touch or to adjust
the contrast of screen
- Saturation: touch or
the saturation of screen
 Note
Touch [Center] to return to the default
settings
to adjust
to adjust