Data Creation And Transmission Guidelines; Printable Area For Each Platen - Epson SureColor F2100 Series User Manual

Parent topic:

Data Creation and Transmission Guidelines

When creating data and transmitting it to the printer using Garment Creator, follow these guidelines:
• For best results, select sRGB colors when creating data to be printed on a T-shirt. sRGB colors are
closer to the actual print results.
• You can print in these formats from Garment Creator: TIFF, JPEG, PNG, BMP.
• You can transmit data only when the printer is not printing.
• While the printer is receiving data, only these operations are possible:
• Turning off the power
• Moving the platen
• Cancelling a print job
Note: When a USB memory device is connected to the printer, printing starts after saving the data to the
USB memory device. This saves you from having to send data again when printing data repeatedly. If
you continue to send data while a USB memory device is connected to the printer, the previous data is
overwritten.
Parent topic:

Printable Area for Each Platen

Each platen provides a different size of printable area. You do not need the platen frame when a grip pad
is attached to the platen.
Platen size
Large
Medium/medium-
grooved
Small
Extra small
Sleeve
Inside the platen frame, you cannot print on the areas shown in gray.
Basic Printing
Creating Your T-shirt Design
Printable area
16 × 20 inch (406 × 508 mm)
14 × 16 inch (356 × 406 mm)
10 × 12 inch (254 × 305 mm)
7 × 8 inch (178 × 203 mm)
4 × 4 inch (102 × 102 mm)
35