HIKVISION DS-7104HWI-SL User Manual page 54

6) Click OK to save setting and back to upper level menu.
Task 2: Draw the Schedule
Steps:
1) Click the icon on the right to select a record type, including Continuous, Motion and None.
To enable Motion triggered recording, you must configure the motion detection settings. For detailed
information, refer to Chapter 8.1.
2) Use the mouse to drag and draw time periods.
Up to 8 periods can be configured for each day.
3) You can repeat the above steps to set schedule for other channels. If the settings can also be used to
other channels, click Copy to enter the Copy Camera interface and then choose the channel to
which you want to copy.
Figure 5. 11 Copy Schedule to Other Channels
4) Click Apply in the Record Schedule interface to save the settings.
User Manual of Digital Video Recorder
Figure 5. 10 Draw the Schedule
53