Delta CP2000 Series User Manual page 268

5. Bar Graph setting
a. Related Device: Choose the VFD Communication Port that you need.
b. Direction Setting: Click on the drop down menu to choose one of the following directions: From
Bottom to Top, From Top to Bottom, From Left to Right or From Right to Left.
c. Maximum Value & Minimum Value: They define the range covered by the maximum value and
minimum value. If a value is smaller than or equal to the minimum value, then the bar graph will be
blank. If a value is bigger or equal to the maximum value, then the bar graph will be full. If a value is
between minimum and maximum value, then the bar graph will be filled proportionally.
6. Button : Currently this function only allows the Keypad to switch pages; other functions are not yet
available. Text input function and Image inserted functions are not yet supported.
Double click on
<Button Type> allows users set up buttons' functions. <Page Jump> and <Constant Setting> are the only
two currently supported functions.
A [ Page Jump ] function setting
Page Jump setting: After you choose the Page Jump function in the drop down list, you will see this

Page Jump Setting Menu
<Function Key> allows you to assign functions to the following keys on the KPC-CC01 keypad: F1,

:
to open set up window.
10-25
Chapter 10 Digital KeypadCP2000