Axis Video Server 241SA User Manual page 12

AXIS 241QA/AXIS 241SA - Using the video server
12
The Snapshot button saves a snapshot of the video image currently displayed. The
Snapshot function and the target directory for saving snapshots can be configured
from the AMC Control Applet, which can be opened from the Windows Control
Panel or by right-clicking the image.
Click the View Full Screen button and the video image will fill the entire screen
area. No other windows will be visible. Press Esc (Escape) on your keyboard to
cancel full screen view.
Click the Record button to start an MPEG-4 recording (only available when
viewing MPEG-4).
AMC Audio controls
There are audio controls for controlling the client computer's speaker output. These
controls are only available in the MPEG-4 video format and when audio is enabled, see
Audio Settings, on page 23.
Click the Speaker and Microphone buttons to switch the sound off and on, for the
speaker and microphone, respectively.
When using Half-duplex mode, this button toggles between allowing you to speak
and listen. The first icon indicates that you can talk and the speaker attached to the
video server plays your voice. The second icon indicates that you will hear audio
from the video server, but no audio is sent to web clients. When in simplex talk
mode, the icon toggles between allowing you to speak, and is dimmed when you do not
want other clients to receive any audio.
Note that these AMC toolbar functions can also be accessed by right-clicking in the image.
For information on using Pan/Tilt/Zoom controls, please see Pan Tilt Zoom, on page 37.
Use the slider to control the volume on the speaker and microphone.
The volume can be set between 0 and 100.