Figure 8.20
Install speed control to switch panel. Attach
knob to speed control.
SNAP
DISC
F
F
Figure 8.22 Blower Wiring Diagram
RHEOSTAT
F
M
M
F
6 in. (152mm) BLACK
F
M
Quadra-Fire • Sapphire • 7055-116 Rev. D • 6/11
Figure 8.21
Cut out the rheostat/speed control cover on rear
shield. Re-install rear shield.
Connect the blower to the power supply and turn on the
gas supply.
NOTE: This blower utilizes a snap disc to control ON and
OFF operation. When the correct temperature is reached,
the blower will automatically turn ON. Use the rheostat/
speed control knob to adjust the fan speed to suit your
preferences.
4 in. (102mm) WHITE
F
M
BLOWER
CORD
M
F
33