Changing Temperature Unit; General; Procedure - FLIR K2 User Manual

10 Operation
3. Turn the ring about 90° counter-clockwise.
4. Pull out the plastic insert.
CAUTION
The plastic insert has an O-ring seal. Do not damage the O-ring seal.

10.4 Changing temperature unit

10.4.1 General

The camera displays temperatures in ℃ or ℉. You change the temperature unit with a
switch, located in the connector bay.

10.4.2 Procedure

Follow this procedure:
1. To access the temperature unit switch, see section 10.3 Accessing the connector bay,
page 18.
2. Set the temperature unit switch to the desired position.
19
#T559972; r. AG/39882/39882; en-US