Terminal Procedure Charts - Garmin G1000 Reference Manual

Additional Features
Displaying Pathways
1) Press the PFD Softkey.
2) Press the SYN VIS Softkey.
3) If not already enabled, press the SYN TERR Softkey.
4) Press the PATHWAY Softkey.
5) Press the BACK Softkey to return to the previous page.
Displaying Heading on the Horizon
1) Press the PFD Softkey.
2) Press the SYN VIS Softkey.
3) If not already enabled, press the SYN TERR Softkey.
4) Press the HRZN HDG Softkey.
5) Press the BACK Softkey to return to the previous page.
Displaying Airport Signs
1) Press the PFD Softkey.
2) Press the SYN VIS Softkey.
3) If not already enabled, press the SYN TERR Softkey.
4) Press the APTSIGNS Softkey.
5) Press the BACK Softkey to return to the previous page.

TERMINAL PROCEDURE CHARTS

NOTE: With the availability of SafeTaxi
be necessary to carry another source of charts on-board the aircraft.
SafeTaxi
®
SafeTaxi ® is an enhanced feature that gives greater map detail as the map range
is adjusted in on the airport. The airport display on the map reveals runways with
numbers, taxiways identifiers, and airport landmarks including ramps, buildings,
control towers, and other prominent features. Resolution is greater at lower map
ranges. The aircraft symbol provides situational awareness while taxiing.
Selecting the DCLTR Softkey cycles through the different declutter levels. DCLTR
shows all map detail. DCLTR-1 removes taxiway markings and airport identification
labels. DCLTR-2 removes VOR station ID, the VOR symbol, and intersection names
50
Garmin G1000 Cockpit Reference Guide for the Hawker Beechcraft C90A/GT/GTi
, ChartView, or FliteCharts
®
, it may
®
190-00664-02 Rev. B