Adjusting Volume - Garmin G1000 Reference Manual

Additional Features
Entering a Channel Directly
1) While on the XM Radio Page, select the CHNL Softkey.
2) Select the DIR CH Softkey. The channel number in the Active Channel Box
is highlighted.
3) Select the numbered softkeys located on the bottom of the display to
directly select the desired channel number.
4) Press the ENT Key to activate the selected channel.
Assigning Channel Presets
Up to 15 channels from any category can be assigned a preset number.
1) On the XM Radio Page, with the desired channel active, select the
PRESETS Softkey to access the first five preset channels (PS1 - PS5).
2) Select the MORE Softkey to access the next five channels (PS6 – PS10),
and again to access the last five channels (PS11 – PS15). Pressing the
MORE Softkey repeatedly cycles through the preset channels.
3) Select any one of the (PS1 - PS15) softkeys to assign a number to the
active channel.
4) Select the SET Softkey on the desired channel number to save the channel
as a preset.

Adjusting Volume

1) With the XM Radio Page displayed, press the VOL Softkey.
2) Press the VOL – Softkey to reduce volume or press the VOL + Softkey to
increase volume. (Once the VOL Softkey is pressed, the volume can also be
adjusted using the small FMS Knob.)
3) Press the MUTE Softkey to mute the audio. Press the MUTE Softkey again
to unmute the audio.
Radio volume may also be adjusted at each passenger station.
54
Garmin G1000 Cockpit Reference Guide for the Hawker Beechcraft C90A/GT/GTi
190-00664-02 Rev. B