Access Point - Canon EOS 5D Mark IV Instruction Manual

The IP address can only be set automatically in environments using DHCP
servers, or access points or routers with DHCP server functionality, such
that the IP addresses, etc. are required to be assigned automatically.
Specify the PIN code at the
8

access point.

At the access point, specify the 8-digit

PIN code displayed on the camera's
LCD monitor.
For instructions on setting PIN codes

at the access point, refer to the
access point's instruction manual.
After the PIN code is specified, select

[OK] and press <0>.
Connect to the access point.
9
Select [OK] and press <0> to

establish a connection with the
access point.
 When a connection with the access
point is established, the next screen
is displayed.
Select [Auto setting].
10
Select [OK] and press <0> to

display the setting screen for the Wi-
Fi function selected in step 4 (p.68).
If [Auto setting] results in an error or

if you want to specify the settings
manually, see page 174.
Connecting via WPS (PIN Mode)
67