Responding To Error Messages - Canon EOS 5D Mark IV Instruction Manual

Responding to Error Messages

When a connection error occurs, display the details of the error by
following one of the procedures below. Then, eliminate the cause of the
error referring to the examples shown in this chapter.
On the [View info] screen, press <0> (p.144).

Select [Error details] on the [Wi-Fi on] screen, then press <0>.

Click the error code number's page in the following chart to jump to the
corresponding page.
11 (p.149) 12 (p.149)
21 (p.150) 22 (p.151)
41 (p.154) 42 (p.156)
46 (p.158) 47 (p.158)
61 (p.159) 62 (p.159)
66 (p.161) 67 (p.161)
91 (p.162)
121 (p.163) 122 (p.163)
126 (p.164) 127 (p.164)
141 (p.164) 142 (p.164)
If [Waiting to retry transfer...] is displayed
When an error occurs, [Err**] is displayed on the upper right of the [Wi-Fi
function] screen. It disappears when the camera's power is set to <2>.
148
23 (p.152) 24 (p.152)
43 (p.156) 44 (p.156)
63 (p.160) 64 (p.160)
68 (p.162) 69 (p.162)
123 (p.163) 124 (p.163)
If the screen on the left is displayed,
image transfer to an FTP server has
failed. Check the error code number and
eliminate the cause of the error.
Once the cause of the error is eliminated,
the images whose transfer previously
failed will be retransferred automatically.
Note that when you cancel image transfer
or turn off the camera, the image will not
be retransferred automatically. See page
119 and transfer the image.
45 (p.157)
65 (p.161)
125 (p.164)