Canon EOS 5D Mark IV Instruction Manual page 70

Connecting to a Network Manually
(1)
(1) SSID
(2) An icon is displayed if the access point is encrypted
(3) Channel used
[Refresh] and [Manual settings]
Scroll down the screen in step 6 to display [Refresh] and [Manual

settings].
To search for access points again, select [Refresh].

To configure settings for the access point manually, select [Manual

settings]. Enter the SSID using the virtual keyboard and then
configure settings following the instructions displayed.
For [Camera access point mode] displayed in step 6, see page 74.
70
Select [Select a network].
5


Select an access point.
6
(2) (3)

Displayed when [q], [D], or [l] is
selected in step 4. Go to step 6 when
selecting [r] or [w].
Select [OK] and press <0> to go to
the next screen.
Use <5> or <9> to select the
access point to connect to from the
list of access points.