Canon EOS 5D Mark IV Instruction Manual page 71

Entering the Access Point Encryption Key
Enter the encryption key (password) specified for the access point.

For details on the specified encryption key, refer to the access
point's instruction manual.
The screens displayed in steps 7 to 9 below vary depending on the

authentication and encryption specified for the access point.
Go to step 10 when the [IP address set.] screen is displayed

instead of the screens for steps 7 to 9.
Select a key index.
7
The [Key index] screen is displayed

only if WEP encryption is used by the
access point.
Select the key index number

specified for the access point, then
press <0>.
Select [OK] and press <0> to go to

the next screen.
Select the format and the number
8
of characters used for the key.
Select [OK] and press <0> to go to

the next screen.
Enter the encryption key.
9
Enter the encryption key using the

virtual keyboard (p.18), then press
the <M> button.

The [IP address set.] screen (p.72)
will be displayed.
Connecting to a Network Manually
71