Bluetooth Speaker - Beast Hover-1 HY-X10 Operation Manual

BLUETOOTH SPEAKER

The H1 has a powerful built-in wireless speakers so you can play your
music while riding.
PAIRING THE SPEAKER
1. Ensure your H1 is turned off. If it is not, please turn off your Hover-1 first
before pairing.
2. Turn on your H1 and the speakers will "Ping" to announce that it's
waiting for a Bluetooth connection. This will indicate your Beast
®
speaker is now in pairing mode.
3. Place the Beast and the Bluetooth device to which you would like
®
to pair it within the operating distance. We recommend keeping the
two devices no further than 3 feet apart during pairing.
4. Ensure Bluetooth is enabled on your phone or music device. Refer
®
to manufacturer's instructions for how to enable Bluetooth on your
®
device.
5. Once you have activated Bluetooth on your device, select the
®
option "HY-X10" from the list of available Bluetooth devices.
®
6. If required, enter the PIN code "000000" and confirm the entry.
7. The Beast will say "Paired" when successfully paired.
8. Please note, pairing mode on the Hover-1 will last for two minutes. If
no devices are paired after two minutes, the H1 speaker will
automatically return to standby mode.
9. If pairing is unsuccessful, turn off the H1 first and re-pair following the
aforementioned steps.
10. If your smart phone is out of range, or the battery is low on your
Hover-1 Beast, your speaker may disconnect from your smart device,
and the Beast will say "Disconnected." To reconnect, follow the
aforementioned steps, or recharge your scooter.
NOTE: Once you have paired the Beast speaker with a device, the
speaker will remember this device and will pair automatically when
the device's Bluetooth is activated and in range. You do not need to
®
re-pair any previously connected devices.
Your scooter can pair up to two multi-point devices. You can
reconnect a previously paired device without going through the
pairing or PIN process on up to two devices.
LISTENING TO MUSIC
Once the Beast Bluetooth speaker is paired to your device, you can
stream music wirelessly through it. Only one speaker will play music as
the other speaker is strictly for safety alerts from your Hover-1. Select
the track you wish to listen to on your device to listen via the speakers.
All volume and track controls will be made using your music device.
Should you encounter any problems while streaming, please refer to
your device's user manual.
7