Specifications - Beast Hover-1 HY-X10 Operation Manual

OPERATING PRINCIPALS
The device uses digital electronic gyroscopes and acceleration
sensors to control balance and motion, depending on the user's
center of gravity. The device also uses a control system to drive the
motors that are located within the wheels. The device has a built-in
inertia dynamic stabilization system that can help assist with balance
when moving forward and backwards, but not while turning.
TIP – To increase your stability, you must shift your weight in order to
overcome the centrifugal force during turns, especially when
entering a turn at higher speeds.
Model:
Net Weight:
Load:
Max Speed:
Max Distance Range:
Max Incline Angle:
Minimum Turning Radius:
Battery Type:
Battery Voltage:
Battery Capacity:
Power Requirement:
Wheel Size:
Product size:
Bluetooth Range:
Bluetooth Speaker:
FCC ID: 2AANZX10
BT ID: D036974
WARNING
Any Hover-1 Beast that does not work
properly can cause you to lose control and
fall. Inspect the entire device thoroughly
before every ride, and do not ride it until any
problems have been corrected.

SPECIFICATIONS

HY-X10 - Hover-1 Beast
30 lbs (13.5 kg)
44-330 lbs (20-150 kg)
Up to 7.45 mph (12 km/h)
Up to 11 miles (18 km)
(at 110lbs load)
20° degrees
0°
Lithium-ion
36 V
4.3 Ah
AC 100-240V, 50-60 Hz
10 Inches (25.4 cm)
28x11x12inch (730x280x300mm)
Up to 33ft
V4.0 with stereo sound quality
5