Page 1
DJ MIXER DJM-750MK2 pioneerdj.com/support/ rekordbox.com For FAQs and other support information for this product, visit the above site. Operating Instructions (Quick Start Guide)
Page 2
IMPORTANT CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, The exclamation point within an equilateral CAUTION: TO PREVENT THE RISK OF ELECTRIC within an equilateral triangle, is intended to triangle is intended to alert the user to the SHOCK, DO NOT REMOVE COVER (OR alert the user to the presence of uninsulated presence of important operating and...
WARNING AVERTISSEMENT This equipment is not waterproof. To prevent a fire or Cet appareil n’est pas étanche. Pour éviter les risques shock hazard, do not place any container filled with d’incendie et de décharge électrique, ne placez près de lui liquid near this equipment (such as a vase or flower un récipient rempli d’eau, tel qu’un vase ou un pot de pot) or expose it to dripping, splashing, rain or...
Page 4
(2) this device must accept any interference received, including interference that may cause undesired operation. Product Name: DJ MIXER Model Number: DJM-750MK2 Responsible Party Name: PIONEER ELECTRONICS (USA) INC. SERVICE SUPPORT DIVISION Address: 1925 E. DOMINGUEZ ST. LONG BEACH, CA 90810-1003, U.S.A.
Thank you for purchasing this Pioneer DJ product. Read this manual and the Operating Instructions that is available on the Pioneer DJ site before using the product. Both contain important infor- mation that you should understand to properly use the product.
Features This 4-channel DJ mixer is the next model in the DJM series from Pioneer DJ, the world standard in the disco and club scene. It sup- ports various types of DJ performances by incorporating the EQ FADER CURVE, SOUND COLOR FX, BEAT FX, and SEND/RETURN functions for mixing that were newly developed for the DJM-900NXS2, which is equip- ment for permanent installation in a club.
Part names and functions Rear panel 1 u button (page 12 ) d AC IN Turns this unit on and off. Connect to a power outlet with a supplied power cord. Connect the power cord after all the connections are completed. 2 RETURN terminals (page 11 ) Be sure to use the supplied power cord.
Control Panel 1 PHONES terminal (page 12 ) 6 SOUND COLOR FX buttons Connect headphones. Turns on and off SOUND COLOR FX. 1/4” stereo phone plugs and 3.5 mm stereo mini plugs are supported. 7 OFF, ON, TALK OVER selector switch (page 12 ) 2 LEVEL control (page 12 ) Turns the microphone on and off.
d EQ/ISO (HI, MID, LOW) controls (page 12 ) z TAP button Adjusts the sound quality of each channel. When the BPM measurement mode is set to [TAP], tap this button with a finger to input the BPM manually. e Channel Level Indicator (page 12 ) A UTILITY (WAKE UP) button Displays the sound level of each channel before it passes through the channel faders.
! When connecting this unit with a computer, be sure to use the USB cable supplied with this unit. ! A USB hub cannot be used. Connecting input terminals Analog player Analog player Analog player Analog player Microphone rekordbox Computer To power outlet Pioneer DJ’s DJ player Pioneer DJ’s DJ player...
(for booth monitor) 1 When connecting a mobile device, use the cable supplied with the device. For information on compatible mobile devices, see the Pioneer DJ site below. pioneerdj.com/support/ 2 Also connect the external effector to the [RETURN] terminal (input terminal).
Operation Basic Operation Monitoring sound with headphones 1 Connect headphones to the [PHONES] terminal. Outputting sound 2 Press the [CUE] button for the channel to monitor. 3 Set the [MONO SPLIT, STEREO] selector switch. 1 Press the [u] button. — [MONO SPLIT]: Outputs the sound of the channel selected with This unit turns on.
Additional information Troubleshooting ! If something is wrong with this unit, check the following issues, and also access the Pioneer DJ site and check [FAQ] for [DJM-750MK2]. pioneerdj.com/support/ Some problems occurs due to the connected components. If the problem cannot be resolved after checking the connected components, ask the service center or dealer for repairs.
Specifications General – Main Unit Power requirements ........AC 110 V to 240 V, 50 Hz/60 Hz Power consumption ................40 W Power consumption (standby) ............. 0.3 W Main unit weight ..............6.6 kg (14.6 lb) Max. dimensions ....320 mm (W) × 107.9 mm (H) × 387.9 mm (D) (12.6 in.
Page 15
Within 40 days of receiving your complaint, Pioneer DJ will investigate the dispute and will either: (1) respond to your complaint in writing informing you what action Pioneer DJ will take, and in what time period, to resolve the dispute; or (2) respond to your complaint in writing informing you why it will not take any action.