Page 1
DJ MIXER DJM-250MK2 http://pioneerdj.com/support/ http://rekordbox.com/ The Pioneer DJ site shown above offers FAQs, information on software, and various other types of information and services to allow you to use your product in greater comfort. Operating Instructions (Quick Start Guide)
Thank you for buying this Pioneer DJ product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.
Page 3
IMPORTANT NOTICE D36-AP9-3*_A1_En POWER-CORD CAUTION D3-4-2-2-4_B1_En The Safety of Your Ears is in Your Hands S002*_A1_En Supplied power cord ESTABLISH A SAFE LEVEL: WARNING D41-6-4_A1_En BE SURE TO OBSERVE THE FOLLOWING GUIDELINES: CAUTION D8-10-3a_A1_En S001a_A1_En CAUTION Information to User D8-10-2_A1_En NOTE: D8-10-1-2_A1_En...
Page 4
FEDERAL COMMUNICATIONS COMMISSION DECLARATION OF CONFORMITY D8-10-4*_C1_En...
Thank you for buying this Pioneer DJ product. Be sure to read this manual and the Operating Instructions that is available on the Pioneer DJ site. Both documents include important information that you should understand before using this product. In particular, be sure to read “IMPORTANT SAFETY INSTRUCTIONS.”...
This unit is a 2 channel DJ mixer. It is the next in the DJM series from Various instructions are sometimes provided as files in the PDF Pioneer DJ, the world standard in the disco and club scene. This unit format.
Part names and functions Rear panel 1 Cord hook 5 MASTER1 output terminals (page 11 ) Hook the power cord of the AC adaptor to avoid accidentally Connect your equipment, such as a power speaker or a power disconnecting it from the unit. amplifier, to the analog input terminal.
Control Panel 1 PHONES terminal (page 11 ) 4 MIC LEVEL control (page 12 ) Connect headphones. Adjust the volume to output from the microphone. This unit supports 1/4” stereo phone plugs and 3.5 mm stereo mini 5 AUX TRIM control plugs.
Page 9
7 TRIM control (page 12 ) Adjust the volume from each channel. 8 ISO (HI, MID, LOW) controls (page 12 ) Adjust the sound quality of the respective channels. 9 Master Level indicator (page 12 ) It shows the volume from the MASTER output. When the volume is too loud, the [CLIP] indicator flashes.
! Connect this unit and the computer directly using a USB cable. ! Use USB cables that conform to USB 2.0. ! USB hubs cannot be used. Connecting input terminals Analog player Analog player Microphone Rear panel Computer Pioneer DJ’s DJ player AC adaptor To power outlet Pioneer DJ’s sampler, etc.
Connecting output terminals Front panel Rear panel Power amplifier 1 Headphones Power speakers 1 1 Be sure to use the [MASTER1] output terminals only for a balanced output. Connection with an unbalanced input (such as RCA) using an XLR to RCA converter cable (or converter adapter), etc., may lower the sound quality and/or result in noise.
Operation Basic Operation Setting the fader curve Switch the [CROSS F.CURVE (THRU, )] selector switch. Outputting sound — [THRU]: Set to this option when not using the cross fader. — [ ]: The curve is increased slowly. 1 Press the switch. —...
Additional information Troubleshooting ! If you think that there is something wrong with this unit, check the items below, and check [FAQ] for [DJM-250MK2] on the Pioneer DJ site. http://pioneerdj.com/support/ Also, check the connected devices. If the problem cannot be resolved, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.
Power consumption (standby) ............0.5 W trademarks General - Main Unit • Pioneer DJ is a trademark of PIONEER CORPORATION, and is used Power consumption ............DC 12 V, 600 mA Main unit weight ...............3.0 kg (6.6 lb) under license. rekordbox is a trademark or registered trademark of Max.