Connections
Connecting the DAB/FM Aerial
Fully extend the DAB / FM aerial. Connect the supplied DAB / FM aerial to the DAB / FM
antenna socket on the rear of the unit by turning the antenna screw cap clockwise.
Rear View of the Main Unit
AC 220-240V ~50/60Hz
Speaker Connections
1. Connect the speaker cables between the terminals as shown below.
2. Connect the speaker cables with a sliver head (black label) to the (–) terminals and
cable with a gold head (red label) to the (+) terminals.
Rear View of
the Speaker
How to Connect
•
Turn the terminal cap counterclockwise to loosen it. The speaker terminal caps cannot
be fully removed from the base.
•
Insert the wire into the terminal fully.
•
Turn the terminal cap clockwise to securely connect it.
Connect the speaker cable to the wrong terminal will cause the sound out of phase.
• Do not overtighten, this could damage the aerial.
• To avoid noise, keep aerial away from the unit, the
connecting cables and the mains cable.
Rear View of the Main Unit
Rear View of
the Speaker
AC 220-240V ~50/60Hz
11