Nfc (Near Field Communication) Operation; Maintenance; Cleaning The Unit; Removing, Installation The Grill And Cleaning The Speakers - JVC UX-D150 Instruction Manual

NFC (Near Field Communication) Operation

Pair your NFC-enabled mobile device directly with this unit by just a single tap.
1. Activate NFC on your mobile device.
2. Tap the mobile device on the
up. Your unit will switch to Bluetooth® mode automatically.
3. Operate your mobile device directly for playback features.
4. To disconnect, tap the mobile device on the
NFC from your mobile device.
• The NFC function only works with mobile devices that support NFC technology.
• You may need to remove your mobile device case to connect using NFC.

Maintenance

Cleaning the Unit

Ensure the unit is fully unplugged from the mains socket before cleaning.
• To clean the units, wipe the case with a slightly moist, lint-free cloth.
• Do not use any cleaning fluids containing alcohol, ammonia or abrasives.
• Do not spray aerosol at or near the unit.

Removing, Installation the Grill and Cleaning the Speakers

The grill is held by pins. To remove the grill, pull gently around the edge away from the
speaker, slowly working your way from one end of the speaker to the other.
To re-install, align the grill pins with the cups in the speaker and push into place.
Use a dampened soft cloth or paper towel to clean the cabinet. The grill is best cleaned by
brushing it off with a lint-free cloth.
When cleaning the speakers without grills, beware of making a punch or push a small dent on a speaker's
dust cap. These damage might affect the speaker's performance.
26
icon of the unit. The device vibrates or a message pops
icon of the unit to disconnect or disable