Cisco WVC54GCA User Manual page 8

Chapter 2
Enter the Static IP Address
11. If you want to keep the Camera's default password
(admin), leave the fields unchanged and click Next.
If you want to change the password, enter the new
password, re-enter to confirm, then click Next.
Enter the Camera Password
12. The Wizard will search for wireless networks, then list
the wireless networks found. If the wireless network
you want to connect to is not listed, click Refresh to
update the list. Select the wireless network that you
want to connect the Camera to, then click Next.
Select Wireless Network
Wireless-G Internet Home Monitoring Camera
Setting Up and Mounting the Camera
13. The Wizard displays the wireless security method that
your network is using: WPA/WPA2-Personal, WEP
(128-Bit), or WEP (64-Bit). Follow the appropriate
instructions below. If you are not using wireless
security, select Disabled and go to step 14.
•
WPA/WPA2-Personal Enter a passphrase in the
Passphrase field and click Next. The passphrase is case-
sensitive and must be from 8 to 63 characters in length.
Security Settings - WPA/WPA2-Personal
•
WEP (64-Bit) or WEP (128-Bit)
key automatically, enter a passphrase in the Passphrase
field and click Next. The passphraseis case-sensitive and
should not be longer than 16 characters. It must match
the passphrase of your other wireless network devices
and is compatible with Linksys wireless products only.
(If you have any non-Linksys wireless products, enter
the WEP key manually on those products.)
To manually enter a WEP key, leave the Passphrase field
blank, click Next, and enter the WEP key on the next
screen. This WEP key must match the WEP key of your
wireless network. For 64-bit WEP encryption, enter
exactly 10 hexadecimal characters. For 128-bit WEP
encryption, enter exactly 26 hexadecimal characters.
Valid hexadecimal characters are "0" to "9" and "A" to "F".
After you have entered the WEP key, click Next.
Security Settings - WEP (64-Bit) or WEP (128-Bit)
To generate the WEP
7