Chapter 2: Setting Up And Mounting The Camera; Setup Wizard - Cisco WVC54GCA User Manual

Wireless-g internet home monitoring camera
Hide thumbs


Chapter 2
Chapter 2:
Setting up and Mounting
the Camera

Setup Wizard

The Wireless-G Internet Home Monitoring Camera Setup
Wizard will guide you through the installation and
configuration procedure.
Insert the Setup CD-ROM into your CD-ROM drive.
The Setup Wizard should run automatically, and the
Welcome screen should appear. If not, click Start, select
Run, and in the field provided, enter D:\wvc54gca.exe
(if "D" is the letter of your CD-ROM drive).
Setup Wizard - Welcome Screen
Click Click Here to Start to continue.
The Setup Wizard displays the following options.
Setup Camera
Click this to begin the installation
Install Camera Utility
Click this to install the Camera
Utility on your PC.
User Guide
Click this to open the PDF file of this User
Click this to exit the Setup Wizard.
To install the Camera, click Setup Camera.
On the End User License Agreement screen, check the
box next to I accept the agreement and click Next
if you agree and want to continue the installation, or
click Exit to end the installation.
Wireless-G Internet Home Monitoring Camera
Setting Up and Mounting the Camera
End User LIcense Agreement
Connect the included network cable to your network
router or switch. Click Next.
Connect Network Cable to the Switch or Router
Connect the other end of the network cable to the
Camera's Ethernet port. Click Next.
Connect Network Cable to the Camera



  Also See for Cisco WVC54GCA

  Related Manuals for Cisco WVC54GCA

Table of Contents