Kyocera PF-740 Service Manual page 74

5. Remove the connector and the band of
PF paper feed motor.
6. Remove the connector (YC15) from the
PF main PWB and then release the
electrical wires from two wire saddles.
7. Remove four screws and then remove
the PF driving unit.
8. Check or replace the PF driving unit
and refit all the removed parts.
Connector
Band
Wire saddle
Screws
Screw
1-5-12
PF main PWB
YC15
PF main PWB
Figure 1-5-19
PF driving unit
Screw
Figure 1-5-20
3NF