Driving Section; Detaching And Refitting The Pf Driving Unit - Kyocera PF-740 Service Manual

1-5-4 Driving section

(1) Detaching and refitting the PF Driving unit

Procedure
1. Remove three screws and then remove
the rear cover. (seeP.1-5-7)
2. Remove the connector of AC electrical
wire from the paper feeder.
3. Remove three wire holders.
4. Release three wire saddles and then
remove the electrical wires.
Connector
Wire saddle
Wire holders
1-5-11
Figure 1-5-17
Wire saddles
Figure 1-5-18
3NF