Advertisement
Operation
DMX mode
To access the DMX mode, press the "MODE" button to show "Addr" on the LED display. Now press the
"ENTER" button and use the "UP" or "DOWN" buttons to set the desired DXM address from 000-512.
For the DMX functions, please see the DMX chart below.
Channel
1
2
3
4
Daisy Chain Connection
1) Connect the (male) 3 pin connector side of the DMX cable to the output (female) 3 pin
connector of the first fixture
2) Connect the end of the cable coming from the first fixture which will have a (female) 3 pin
connector to the input connector of the next fixture consisting of a (male) 3 pin connector.
Proceed to connect from the output as stated above to the input of the following fixture
and so on.
Value
000-125
126-255
000-125
126-255
000-125
126-255
000
001-255
Function
No function
Red + Amber @100%
No function
Green @ 100%
No function
Blue @ 100%
No function
Colour chase
Advertisement
