Table of Contents
Advertisement
10. Loosely install new damper pinch bolts and new
self-locking nuts to the damper.
SELF-
LOCKING
NUTS
11. Install the wheel sensor harness clip and the
brake hose bracket to the damper.
DAMPER
BRACKET
BOLT
12. With the suspension loaded with the weight of the
vehicle, torque the damper pinch bolts and the
self-locking nuts to 90 N·m (67 lb-ft), and torque
the upper flange nuts to 44 N·m (33 lb-ft).
13. Repeat steps 2 thru 11 to install the right front
damper.
14. Reinstall the service cap and the lid.
15. Reinstall the front wheels.
4 of 9
DAMPER
DAMPER
PINCH
BOLTS
WHEEL
SENSOR
HARNESS
CLIP
BRAKE HOSE
BRACKET
AII 44382 (1008)
Removing the Rear Dampers
16. Lower the vehicle near the ground.
17. Remove the trunk side trim panel.
•
Fold each rear seat-back forward.
•
Pull back the front portion of the spare tire lid
and detach the clips.
SPARE
TIRE LID
•
Remove the spare tire lid.
SPARE
TIRE LID
© 2010 American Honda Motor Co., Inc. - All Rights Reserved.
Advertisement
Table of Contents
