Installing The New Front Dampers - Honda 08W60-SVA-100 Installation Instructions Manual

4. Turn the ignition switch to ON (II), then turn on
the windshield wipers. Turn the ignition switch
off when the wipers are near the A-pillars.
5. Remove the service cap and the lid.
FLANGE
NUTS
6. Remove the three flange nuts from the top of the
damper.
7. Remove the damper assembly. Be careful not to
damage the body.
© 2010 American Honda Motor Co., Inc. - All Rights Reserved.
SERVICE
CAP
LID
DAMPER
ASSEMBLY
AII 44382 (1008)

Installing the New Front Dampers

8. Install the new left front damper assembly onto
the frame.
FRONT
9. Loosely install new flange nuts.
FLANGE
NUTS
DAMPER
ASSEMBLY
SERVICE
CAP
LID
3 of 9