Download Print this page

JMA ECCO PLUS Instruction Manual page 3

Key cutting machine

Advertisement

1
Presentation
and general aspects
General points
1.1
The ECCO PLUS key cutting machine has been designed
taking into account the safety standards currently in
force in the EU.
Although the machine is not difficult to install, it is best
not to try to install, adjust or use it without having first
read this manual.
The machine leaves our factory ready for use and only
requires the carrying out of calibration operations for
the tools that are going to be used.
Transport and packing
1.2
The machine comes packed in packing of the following
size:
Width = 570 mm, length = 520 mm, height = 410mm
Machine weight plus packing = 20 Kg.
When the machine has been unpacked, check carefully
to see if it has suffered any damage during transporta-
tion. If you find any problems, please inform the carrier
immediately and do not do anything with the machine
until the carrier's agent has carried out an inspection.
1.3
Identification label
The ECCO PLUS key cutting machine has an identifi-
cation label, giving the serial number, the name and
address of the manufacturer, the CE mark and the year
of manufacture.
See figure 1
6
2
Characteristics
of the machine
The ECCO PLUS machine is a robust and precise manual
machine for cutting flat cylinder lock keys, vehicle keys,
cross-shaped keys and special keys.
2.1
Parts of a key
1
Head
2
Neck
3
Top shoulder
4
Bottom shoulder
Teeth
5
6
Blade
Back
7
Tip
8
2.2
Main elements of the machine
Milling cutter
1
2-sided clamp
2
Clamp handle
3
Slide
4
Slide handle
5
Fold-away stop
6
Tracer point
7
Start switch
8
Tracer point adjustment control
9
10
Plane
11
Slide advance lever
2.3
Technical information
The main technical information is as follows:
Motor:
Single phase 220V, 50Hz, 0.18Kw,1500 rpm, 1.7 Amp.
or
Single phase 110V, 60Hz,0.18Kw, 1800 rpm 3.14 Amp.
Milling
cutter:
Extra quick speed steel Ø63 x 16 x5 mm.
Speed:
1.500 rpm.
Clamps:
2 sided.
Displacement:
On self-lubricated bearings.
Effective
travel:
X axis = 70 mm
Dimensions:
Width = 530 mm, Depth = 245 mm,
Height = 280 mm.
Weight:
16,5 Kg.
See Figure 2
.

Advertisement

loading