Chapter 2 Introduction - Delta InsightPower SNMP IPv6 User Manual

No. Item Description
Reset Resets the SNMP IPv6. This does not affect the PDC.
3
Button
LED When the SNMP IPv6 is initializing or upgrading firmware, the
4
Indicators two LED indicators flash simultaneously to show its status. Refer
to the following:
The green LED indicator shows the network connection status:
The yellow LED indicator shows the linking status between the
SNMP IPv6 and the PDC:
Rapid simultaneous flashing (every 50ms) : Initialization
z
z
or firmware upgrade in progress.
Slow simultaneous flashing (every 500ms) : Initialization
z
z
failed.
WARNING : Do NOT remove the SNMP IPv6 or dis-
connect PDC's input power during initialization or
firmware upgrade! This could result in data loss or
damage to the SNMP IPv6.
ON : Network connection established and the IPv4 address
z
z
is useable.
OFF : Not connected to a network.
z
z
Flashes slowly (every 500ms) : Faulty IP address.
z
z
Flashes rapidly (every 50ms): PDC linked.
z
z
Flashes slowly (every 500ms): PDC not linked.
z
z
5
Chapter 2 Introduction