Configuring With Ezsetting - Delta InsightPower SNMP IPv6 User Manual

4-2

Configuring with EzSetting

Included in the provided CD, the EzSetting (compatible with Windows 2000/ 2003/
2008/ XP/ Vista/ 7) allows you to easily configure your SNMP IPv6 and upgrade firm-
ware on your SNMP devices. Follow the instructions below:
Step 1
Use a CAT5 cable to connect the SNMP IPv6's Network port to the net-
work.
Step 2 Make sure the two DIP switches of the SNMP IPv6 are set to the OFF posi-
tion (Normal Mode) to enable network communication. Make sure the
workstation and the SNMP IPv6 are on the same LAN.
Step 3
Insert the provided CD in the CD-ROM drive. From the root directory,
launch EzSetting.
Step 4 Click Discover to search all available SNMP devices on the LAN. A list of
devices will be shown.
NOTE
1. If you want to search SNMP devices in a different domain, change the
Subnet and IPv4/ IPv6 Prefix Length and click Discover.
2. If the SNMP IPv6 can not be found, check UDP port 3456 on the worksta-
tion you are using. Make sure it is open.
InsightPower SNMP IPv6 for PDC
1 0