Table of Contents
Advertisement
Step 2
Make sure the two DIP switches of the SNMP IPv6 are set to the OFF posi-
tion (Normal Mode).
Step 3
For Windows 2000, 2003, 2008 and XP, go to Start → Programs → Accesso-
ries → Communications and select HyperTerminal.
NOTE
Microsoft has removed HyperTerminal from Windows Vista and later ver-
sions. If your operation system does not include the program, a free alterna-
tive Telnet/SSH client PuTTY can be downloaded from http://www.putty.org.
Step 4
Enter a name, choose an icon for the connection and click OK. From the
drop-down menu Connect using, select the COM port that is connected
to the SNMP IPv6.
Chapter 4
1 3
System Configurations
- Quick Links:
- Configuring through Com Port
Hide quick links:
Advertisement
Table of Contents
