Delta InsightPower SNMP IPv6 User Manual page 13

NOTE
If you have previously changed the SNMP IPv6's Host Name or IP address,
connect with the new settings.
Step 2
Log in as Administrator (default account/ password: admin/ password,
case sensitive).
Step 3
Specify your preferred display language (default: English) from the drop-
down menu on the top right of the page. The SNMP IPv6 remembers your
language preference. In the following instructions, English is chosen as
the display language.
Step 4 Click System → Administration → User Manager. Manage your login
accounts and passwords under the "Local Authentication" subhead. The
access permission for the account types is shown as follows:
1) Administrator : Allowed to modify all settings.
2) Device Manager : Allowed to modify device-related settings.
3) Read Only User : Only allowed to view settings without the permis-
sion to make changes.
You can manually specify whether users are allowed to log in from other LANs. If
you wish to block login attempts from external connections, select Only in This
LAN. Otherwise, select Allow Any.
Step 5 Click System → Administration → TCP/ IP to set Host Name, IP address,
Subnet Mask and Gateway IP for the SNMP IPv6.
Step 6 Click Time Server to manually set time and date for the system, or enable
automatic time synchronization between the SNMP IPv6 and the time
servers.
NOTE
To completely set up your SNMP IPv6, please refer to Chapter 5: Insight-
Power SNMP IPv6 for PDC Web.
Chapter 4
9
System Configurations