Table of Contents
Advertisement
2.6 Disposal
ABB actively promotes environmental awareness and has an
operational management system that meets the requirements
of EN ISO 9001:2000 and EN ISO 14001:2004. Our products
and solutions are intended to have minimum impact on the
environment and persons during manufacturing, storage,
transport, use and disposal.
This includes the environmentally friendly use of natural
resources. ABB conducts an open dialog with the public
through its publications.
This product/solution is manufactured from materials that can
be reused by specialist recycling companies.
2.7 Information on WEEE Directive 2002/96/EC
(Waste Electrical and Electronic Equipment)
This product or solution is not subject to the WEEE Directive
2002/96/EC or corresponding national laws (e.g., the ElektroG
- Electrical and Electronic Equipment Act - in Germany).
Dispose of the product/solution directly at a specialist recycling
facility; do not use municipal garbage collection points for this
purpose. According to the WEEE Directive 2002/96/EC, only
products used in private applications may be disposed of at
municipal garbage facilities. Proper disposal prevents negative
effects on people and the environment, and supports the reuse
of valuable raw materials. ABB can accept and dispose of
returns for a fee.
2.8 Transport and storage
— After unpacking, check the device for transport damage.
— Check the packaging material for accessories.
— During intermediate storage or transport, store the device
in the original packaging only.
The duration of storage of the unused device is strictly related
to the duration of the batteries (see paragraph 6.6
"Consideration about NiMh batteries).
Warranty conditions are stipulated on the order
acknowledgment by the supplier.
2.9 Safety information for electrical installation
Warning. Electrical connections may only be established by
authorized specialist personnel in accordance with the
electrical circuit diagrams. The electrical connection
information in the manual must be observed; otherwise, the
applicable protection type may be affected.
6 OI/DHH805-EN Rev. D | Handheld communicator Model DHH805-A
2.10 Contacting ABB
Should assistance be required with any of the company's
products, contact the following:
— Telephone: +39 0344 58111
— Internet: www.abb.com
Select Instrumentation & Analytical from the Our
Offerings section
Select Contact Directory from the Products & Services
tab. Then select your country location from the Your
Country drop-down menu in the center of the page.
Select Service from the Instrumentation & Analytical
Product Group listing and complete the requested
information in the pop-up window.
2.11 Conclusions
Important. The information contained in this document is subject
to change without notice.
ABB SpA., its affiliates, employees, and agents, and the authors of
and contributors to this publication specifically disclaim all liabilities
and warranties, express and implied (including warranties of
merchantability and fitness for a particular purpose), for the
accuracy, currency, completeness, and/or reliability of the
information contained herein and/or for the fitness for any particular
use and/or for the performance of any material and/or equipment
selected in whole or part with the user of/or in reliance upon
information contained herein. Selection of materials and/or
equipment is at the sole risk of the user of this publication.
This document contains proprietary information of ABB SpA., and
is issued in strict confidence. Its use, or reproduction for use, for
the reverse engineering, development or manufacture of hardware
or software described herein is prohibited. No part of this document
may be photocopied or reproduced without the prior written
consent of ABB SpA.
2 Safety notes
Hide quick links:
Advertisement
Table of Contents
