Getting Started - Philips SE450 User Manual

Getting Started

CONNECTING YOUR PHONE
1. Connect the output plug of the mains
adapter to the bottom of the base
station.
2. Connect the mains adapter to a
standard wall outlet.
3. Connect the telephone line cord to the
phone socket at the bottom of the
base station and the wall phone
socket.
CONNECTING YOUR CHARGER
* For multi-pack models only
1. Connect the output plug of the mains
adapter to the bottom of the charger.
2. Connect the mains adapter to a
standard wall outlet.
- 11 -
Getting Started
WALL MOUNTING THE BASE
The base is designed to support wall mounting. To wall mount the base, follow
the instructions below.
CAUTION: Other wall mounting methods are not recommended and may
damage the product.
1. Remove the bracket from the back of the base station by pressing
down the two latches on the top of the bracket.
2. Turn the bracket upside down and then re-insert the bracket to the
back of the base station.
3. Insert screws (not included) into the wall.
4. Align the mounting holes on the back of the base with the screws
on the wall.
5. Slide the base down into place.
For US, replace steps 3 and 4 above with
"Align the mounting holes on the back of the base with a standard wall phone
mounting jack."
[Image to be added for EU version]
- 12 -