Philips SE450 User Manual page 30

TURNING OFF THE ANSWERING MACHINE
You can turn off the answering machine either through the base or the handset.
Through the handset,
1. Press .
2. Select Answer machine Answer
on/off. Press .
OK
3. Select Off. Press OK . The setting is
saved.
Once switched off, the message counter turns off.
SETTING THE ANSWERING MACHINE LANGUAGE
This feature only applies to model(s) with multiple-language support.
The answering machine language is the language for the pre-recorded OGM and
voice prompt instructions (for models that support voice prompts) announced by
the answering machine.
1. Press .
2. Select Answer machine
3. Select the new setting. Press
SETTING THE ANSWER MODE
By default, the answering machine is set to Answer & Rec mode (message can
be left by the callers), this can be changed to Answer Only (no message can be
left by the callers. The caller will be prompted to call back later.
1. Press .
2. Select Answer machine
3. Select the new setting. Press
NOTE: Memory Full. Answering machine automatically switches to
answer only mode.
The Answering Machine
Through the base,
1. Press to turn off the answering
machine during standby.
Settings Language. Press OK .
OK . The setting is saved.
Answer mode. Press .
OK
. The setting is saved.
OK
- 53 -
The Answering Machine
OUTGOING MESSAGES (OGM)
The outgoing message is the message your caller hears when the answering
machine picks up the call. Your answering machine comes with 2 pre-recorded
outgoing messages: Answer and Record mode and Answer Only mode.
Recording an outgoing message
The maximum length of the outgoing message is 60 seconds. After recording,
your new outgoing message will automatically replace the old one.
1. Press .
2. Select Answer machine
3. Select Answer & rec. or Answer only. Press
4. Select Record OGM. Press
5. Start recording after the beep.
6. Press to stop recording or recording will stop after 60 seconds.
OK
The recorded outgoing message will play back automatically for
review.
TIP: Restore Pre-recorded outgoing message. If you want to restore
the pre-recorded outgoing message, simply delete your current
outgoing message.
Listening to the current outgoing message
1. Press .
2. Select Answer machine
3. Select Answer & rec. or Answer only. Press
4. Select Play. Press
OK
message.
Record OGM. Press OK .
.
OK
.
OK
Record OGM Press OK .
OK .
. The handset plays the current outgoing
- 54 -