3 Get started
Caution
•
Ensure you have read the safety instructions in
the "Important" section before you connect
and install your handset.
Connect the base station
Warning
•
Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or the underside
of the phone.
•
Use only the supplied power socket to charge
the battery.
Note
•
The type plate is located on the bottom of the
base station.
1
Connect the supplied splitter to the
socket on the bottom of the base station.
2
Connect one end of the telephone line
cord and output plug of the power socket
to the respective splitter connectors.
3
Connect the other end of power
socket to a standard wall outlet and the
telephone line cord to the phone socket.
Connect the charger
1
Connect the power socket to a standard
wall outlet.
Install the handset
Caution
•
Risk of explosion! Keep batteries away from
heat, sunshine or fire. Never discard batteries
in fire.
•
Use only the supplied batteries.
•
Risk of decreased battery life! Never mix
different brands or types of batteries.
EN
13