The System - Philips SE450 User Manual

1.8/1.9gh dect telephone; digital answering machine; low radiation; caller id; hands-free
Hide thumbs Also See for SE450:
Table of Contents

Advertisement

The System

REGISTERING ADDITIONAL HANDSET(S)
The procedures described below are the procedures you will find in your handset.
The procedures may vary according to the handset you want o register. In this
case, refer to the manufacturer's instruction of the additional handset.
Additional handsets must be registered to the base station before you can use
them. Your base station can register up to 5 handsets. The system PIN may be
required for registering or unregistering handsets.
1.
Press
on the base station for 3 seconds.
2.
Press
on the handset.
3.
Select Advanced set
4.
Enter the system PIN (Pre-set: 0000). Use
corrections.
5.
Press
. Your handset starts searching for the base.
OK
Registration shall be completed within 60 seconds. The base
automatically assigns a handset number to the handset.
NOTE: If the PIN is incorrect or no base is found within a certain period,
your handset displays a notification message.
Register. Press
.
OK
to make
BACK
- 49 -
The System
DELETING A HANDSET
Use one handset to unregister another handset that shares the same base
station.
1.
Press
.
2.
Select Advanced set
3.
Enter the system PIN. Use
4.
Press
. Select the handset (number) you want to delete.
OK
TIP: Handset Number. The handset number displays beside the
handset name during standby.
5.
Press
. The handset is deleted.
OK
CHANGING YOUR PIN
The system PIN is used for registration and protecting access rights to some of
the menus and remote access to the answering machine. The pre-set PIN is
0000. You can personalize your PIN for greater security.
1.
Press
.
2.
Select Advanced set
3.
Enter the system PIN. Use
4.
Press
OK
to confirm the system PIN.
5.
Enter the new system PIN. Press
6.
Enter the new system PIN again for verification. Press
setting is saved.
NOTE: Forgotten PIN. Write down your PIN and save it for future use. If
you have forgotten the PIN, reset your phone and your PIN code will be
restored to the factory pre-set PIN (0000). To reset your phone, see
Restoring default settings on page 51.
Unregister. Press
.
OK
to make corrections.
BACK
Change PIN. Press
.
OK
to make corrections.
BACK
OK
.
. The
OK
- 50 -

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Se455

Table of Contents