The Answering Machine - Philips SE450 User Manual

CHANGING THE COUNTRY SETTING
This feature only applies to model(s) with multiple-country support.
NOTE: The availability of this menu is dependent on your country.
You can change the country setting of your phone when you are using it in
another country. If your handset displays Welcome, refer to Greeting you with
"Welcome" on page 14.
1. Press .
2. Select Advanced set
3. Select the new setting. Press
RESTORING DEFAULT SETTINGS
You can reset your phone settings to the original factory settings.
1. Press .
2. Select Advanced set
confirmation request.
3. Press to confirm. All settings have been reset.
OK
NOTE: After reset, your handset's power switches off. It will switch back
on in a few seconds after updating all the settings. All handsets return
to the Welcome screen after reset.
To see a list of default setting, see Default (pre-programmed) settings on page 61.
The System
Country. Press .
OK
. The setting is saved.
OK
Reset. Press OK . The handset displays a
- 51 -

The Answering Machine

Your SE455 includes a telephone answering machines that records unanswered
calls when it is on. Once switched on, your answering machine is ready to be
used. By default, your answering machine is set to Answer and Record mode.
You can also access the machine remotely.
The LED message counter (two digits 7-segment display) on the base will show
the number of the messages when the answering machine is on.
Memory full
-- 00
Remote access
AA
Recording
You can use the answering machine menu on the handset to change the settings
of the answering machine.
TURNING ON THE ANSWERING MACHINE
You can turn on the answering machine either through the base or the handset.
Through the handset,
1. Press .
2. Select Answer machine Answer
on/off. Press OK .
3. Select On. Press . The setting is
OK
saved.
Once switched on, your answering machine will answer incoming calls after a
certain number of rings depending on the ring delay setting. See Setting the ring
delay on page 58.
The 2-digit number shows:
- The volume level during adjustment, or
- The message number
(blink for new messages)
Through the base,
1. Press to turn on the answering
machine during standby.
- 52 -