Philips SE450 User Manual page 33

REMOTE ACCESS
You can operate your answering machine when you are away from home by
calling your phone from a touch tone phone and entering your 4-digit PIN code.
NOTE: The remote access PIN code is the same as your system PIN.
To change your PIN, see Changing your PIN on page 50.
Activating/deactivating remote access
You can allow or block remote access to your answering machine.
1. Press .
2. Select Answer machine
3. Select the new setting. Press
Accessing your answering machine remotely
1. Make a call to your home number from a touch tone phone.
2. Press when the outgoing message starts playing.
3. Enter your PIN code. You now have access to your answering
machine, and new message(s) starts playing.
NOTE: You have 2 tries to enter the correct PIN code before your phone
hangs up.
4. Press a key to carry out a function. See the Remote access
commands table below for a list of available functions.
NOTE: When no message is playing, your phone will hang up
automatically if no key is pressed for 8 seconds.
The Answering Machine
Settings Remote access. Press
. The setting is saved.
OK
- 59 -
The Answering Machine
Remote access commands
Key Function
1 Repeat current or play previous
message
2 Play messages
3 Skip to next message
6 Delete current message
7 Switch answering machine on
(not available during playback)
8 Stop message playback
9 Switch answering machine off
OK .
(not available during playback)
- 60 -